Quality assurance of Reaction Polymers - Risks in selecting industrial floors

phpMyVisites : an open source website statistics application in PHP/MySQL, distributed under the GPL.

phpMyVisites

Industrial Floor

IC Industrieboden Consulting GmbH
Mozartstrasse 23
D-66976 Rodalben/Pfalz
Tel. +49-6331-2311-0
Fax +49-6331-18433
consulting@industrial-floors.com

2 The "human" factor in performing building work

3 Risks in selecting industrial floors

4 Seven fields of responsibility

5 Nine rules for training

6 Chemical factory on site, but without process computer

7 Training through multimedia

8 Use of time remunerated on the building site

9 Reliable raw material supply?

10 Reduction in complexity to minimize interfaces

11 The target group with positive and negative lists

12 Meaning of the quality standards ISO 9000ff.

Quality assurance of Reaction Polymers

by Dipl.-Chem. Dr. Peter Seidler

Industrial Floors 1995, International Colloquium Jan 10-12, 1995

3. Risks in selecting industrial floors

In the floor-laying operation there are various risks which are indicated in the following table. The table is self-explanatory.

Risks in selecting industrial floors

Outdoor/indoor
Variabilities
Concrete
Aggregate
Admixtures
Contamination
Influence of moisture
Excess water in the concrete
Climate (Utilization)
Ground water
Rising damp
Risks because samples were sporadic
Risks due to cracking (e.g. danger with regard to water protection)
Risks due to different utilization (e.g. high-rack warehouse on mastic asphalt)
Communication risks (e.g. misunderstandings)
Intensity and type of preparation of the substrate
Safety at place of work (e.g. physiology, protection against explosions)
Unforseeable, contingent risks (e.g. asbestos powder for thixotropy)

Last Update: Feb 13, 2002