14 References

1. ANN.: "Problem: Joint Spalls - Spalls that Occur Adjacent to Joints in Floors, Slabs, or Pavements" Concrete Construction, p. 74, 11/00
2. ARBEITSGEMEINSCHAFT INDUSTRIEBAU AGI (Deutschland): Arbeitsblatt A 80 "Industrieböden aus Kunstharz" (1995) - English version to be published
3. ICRI (USA): "Selecting and Specifying Concrete Surface Preparation for Coatings, Sealers, and Polymer Overlays" including nine surface profile chips (1998)
4. SNFORES (France): "Règles et Recommandations" without date
5. p. CHANDRA und Y. OHAMA: "Polymers in Concrete", Boca Raton (USA) 1994, 204 p.
6. M. p. EGLINTON: "Concrete and its Chemical Behaviour" (1987), 136 p.
7. R. GEBHARDT: "Fließbeton und seine Fugenausbildung" in "Industrieböden", 4. Aufl. 2000, p. 59-100 - English version translated by Bill Depuy - to be published
8. M.p. MCGOVERN: "Cracking Down on Repair Materials", Concrete Construction 08.99, p. 50-54
9. P.C. HEWLETT (ED.): "Lea's Chemistry of Cement and Concrete" 4^th ed., London 1998
10. P.C. HEWLETT und P. SEIDLER: "Betonoberfläche und Adhäsion" in "Industrieböden", 4. Ed. 2000, p. 216-232
11. W. H. KUENNING (Ed.) ACI COMMITTEE 515: "Guide for the Protection of Concrete against Chemical Attack by Means of Coatings and other Corrosion-resistant Materials" (1966), p. 1305-1391
12. J. C. MASO (Hg.): "Pore Structure and Construction Materials Properties", Proc. 1st Int. RILEM Congress in Versailles, London 1987, 378 p.
13. W. p. PHELAN: "Guide for Concrete Floor and Slab Construction" ACI 302, Manual of Concrete Practice , p. 302.1R-1 to 45 with 61 references
14. M. PUTERMAN und Y. OHAMA (Ed.) RILEM TC 151: "Adhesion Technology in Concrete Engineering - Physical and Chemical Aspects" in preparation
15. M.PUTERMAN: "Paramters Affecting the Properties of Fresh and Hardened PCC Mortars", Proc. 10^th ICPIC 2001 Honolulu (USA), CD-ROM
16. p.L. SAKAR: "Understanding Floor Covering Failure Mechanism (Influence of Humidity)" Concrete Repair Bulletin 03.99 p. 6-1 with 16 references
17. H. SCHORN: "Shape and Distribution of Polymer Particles in PCC - Investigated by Environmental Scanning Electron Microscope (ESEM)", Proc. 10^th ICPIC 2001 Honolulu (USA), CD-ROM
18. P. SEIDLER (Ed.): CD-ROM "Industrial Floors" with contents of the Intern. Colloquia "Industrial Floors '87, '91, '95, '99, '03" Fraunhofer IRB-Verlag 2003
19. P. SEIDLER (Ed.): "The Concrete Slab as an Industrial Floor and its Upgrading by High Performance Polymers - Durable Design, Application and Repair" - in preparation
20. P. SEIDLER: "Problems of Characterisation of Coatings", ICPIC-8 Oostende (Belgium) 1995
21. P. SEIDLER: "Industrial Floors: Why Apply a Topcoat to Impregnation, Coating or Overlay? ", Proc. 4th South African Conference on Polymers in Concrete, 20-23 June 2000
22. R. SIEVER: "Sand - an Archive of the History of Earth", New York 1988, 254 p.
23. M. SPRINKEL: "25 Years Experience with Polymer Concrete Bridge Deck Overlays", Proc. 10^th >ICPIC 2001 Honolulu (USA), CD-ROM
24. A.M. VAYSBURD, P.H. EMMONS, J.E. MCDONALD, R.W. POSTON and K.E. KESSNER: "Selecting Durable Repair Materials: Performance Criteria - Field Studies", Concrete International, December 2000, p. 39 - 45 with 4 references
25. W.W. WALKER und J.A. HOLLAND: "Design, Materials, and Construction Considerations for Reducing … Curling and Shrinkage", in Proc. 4^th Int. Coll. "Industrial Floors '99" Ed. P. Seidler, TAE(Germany), Vol. I, p. 171-180

www.industrial-floors.com
www.astradur.com
www.aci-int.org
www.rilem.org
www.icri.org